Troubleshooting, Scanner error codes, 7 troubleshooting – HP Scanjet N7710 Document Sheet-feed Scanner User Manual
Page 30: 7troubleshooting

7
Troubleshooting
This section contains solutions for common problems with the scanner.
•
•
Scanner initialization or hardware problems
•
•
Scanner buttons are not working correctly
•
•
For additional troubleshooting, see the help for the HP scanning program that you are
using. For more information, see
Where to get additional information
.
Scanner error codes
For help responding to an error code, see the appropriate topics below.
Error Code
Description
Error 02 SDRAM Error
Press the Power switch to the off position. Wait 30 seconds, and
then press the Power switch to the on position. If the message is
still displayed, contact
.
Error 03 USB Error
1. Check the USB connection between the scanner and the
computer.
2. Use the Windows Device Manager tool to verify that the
computer recognizes the scanner.
The Windows Device Manager tool is available on the
Hardware tab of the Systems tool in the Control Panel.
3. If the computer does not recognize the scanner, uninstall and
then reinstall the scanner software.
4. If the problem persists, contact
.
Error 04 Paper Jam
A document feeder paper jam has been detected. Open the hatch
and clear the jam.
Error 08 Hatch Open
The hatch on the document feeder is open or not securely latched.
Please close the hatch by pressing until you hear a click, and then
rescan.
Error 09 NVRAM ACCESS
Error
Press the Power switch to the off position. Wait 30 seconds, and
then press the Power switch to the on position. If the message is
still displayed, contact
.
Error 10 Motor Fail
Press the Power switch to the off position. Wait 30 seconds, and
then press the Power switch to the on position. If the message is
still displayed, contact
.
Error 18 Multipick Error
The scanner detected that more than one page at a time was fed
through the scanner. Follow these steps to resolve the error:
1. Remove the paper from the document feeder.
2. Sort through the stack to make sure the sheets are not stuck
together.
28
Troubleshooting