HP OneView for VMware vCenter - Manual (Page 64)

•
Array Disk Allocated Capacity—Size of the virtual disk on the array
•
Array Disk Provisioned—Whether the virtual disk uses thick or thin provisioning
•
Array Controller—Controller used for this path
•
Array Port—Storage array's port identifier used for this path
•
Host Group
P4000—Name configured for the host's IQN in the management console ◦
◦ 3PAR—Name of the host object containing the host WWN for this path
◦ P6000 EVA—Name of the host object containing the host WWN for this path
◦ P2000/MSA2000—Nickname of the host with the host WWN for this path
◦ P9000/XP—Name of the host group containing the HBA WWN on the array port for
this path
•
Host Access
P4000—Host access level assigned to the presentation of the disk to the host (for example,
READ/WRITE or READ-ONLY) ◦
◦ 3PAR—N/A. 3PAR storage volumes operate in a read-only/read-write configuration.
◦ P6000 EVA—Host access level assigned to the presentation of the disk to the host (for
example, READ/WRITE or READ-ONLY)
◦ P2000/MSA2000—Access setting for volume mapping (for example, READ/WRITE or
READ-ONLY)
◦ P9000/XP—Host access level assigned to the volume
NOTE: The P9000 or XP array does not allow host access to be specified on a per-host
or per-path basis.
•
Host Mode
P4000—Not applicable ◦
◦
3PAR—Not applicable
◦ P6000 EVA—Host mode assigned to the P6000 EVA host object
◦ P2000/MSA2000—Name of the host's profile
◦ P9000/XP—Host mode assigned to the host group
•
Host Name—Host name
•
Current Owner—Specifies whether the host is the current owner of the selected VM
•
Host HBA Port WWN
P4000—IQN assigned to the host
◦
◦ 3PAR (FC)—WWN for the host port on the host end of this path
◦ 3PAR (iSCSI)—IQN assigned to the host
◦
P6000 EVA—WWN for the host port on the host end of this path
◦ P2000/MSA2000 (FC, SAS)—WWN for the host port on the host end of this path
64 Using Insight Control for vCenter