HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem User Manual
Page 151
Hardware information screens 151
The following table describes the rows within the Uplink Port information table in the Bay Summary
screen.
Column Description
Port
The uplink port number
WWN
Either the World Wide Name assigned to the port or the Server Factory
Default, if not assigning WWNs
SAN Fabric
Name of the SAN Fabric connected to the uplink port
Port Speed
Speed setting of the uplink port
Connector Status
Status of the uplink port
Connected To
MAC address of the device that this port is connected to on the other end.
The device must support LLDP to display this information.
The following table describes the rows within the Server Port Information table in the Bay Summary
Screen. Click Less < to display only the Port, Server Blade, SAN Fabric, Connected To, and Profile
columns. Click More > to display all columns.
Column Description
Port Port
number
Server Blade
Server blade bay location
SAN Fabric
Name of the SAN Fabric connected to this port