HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 11)

HP Virtual Connect Manager 11
operating in bay 2. If you cannot connect to the Virtual Connect Manager in bay 1, try connecting
to the management URL for bay 2.
• Access the Virtual Connect Manager CLI remotely through an SSH session.
In a multi-enclosure VC domain, Virtual Connect Manager runs in bay 1 or bay 2 of the base enclosure. If
both VC Ethernet modules in the base enclosure fail, Virtual Connect Manager is not accessible.
Command line overview
The HP Virtual Connect Manager Command Line Interface can be used as an alternative method for
managing the Virtual Connect Manager. Using the CLI can be useful in the following scenarios:
• HP Management Applications (for example, Systems Insight Manager or Insight Control tools) can
query the Virtual Connect Manager for information these tools need to present a complete
management view of HP BladeSystem enclosures and devices. This interface is also used by the
Management tools to execute provisioning and configuration tasks to devices within the enclosure.
• Users can develop tools that utilize Virtual Connect Manager functions for data collection and for
executing provisioning and configuration tasks.
• When no browser is available or you prefer to use a command line interface, you can access
management data and perform configuration tasks.
For additional information, see the HP Virtual Connect Manager Command Line Interface User Guide on
the HP website (http://www.hp.com/go/bladesystem/documentation).
Logging on to the HP Virtual Connect Manager GUI
Log on using the user name (Administrator) and password from the Default Network Settings label for
interconnect bay 1.