HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 64)

Network management 64
Column name Description
applicable)
Port Status Shows whether each individual port associated with the network is
linked or unlinked and the current link speed
Connector Type Displays the type of connector on the port, for example, RJ-45
Connected to If the individual port is connected to a switch that supports LLDP, the
switch MAC address and switch port are displayed. A link is provided
to obtain more information about the far-end switch port.
Uplink Port Lists the status of the individual port and the location of the individual
port (enclosure, bay, port)
The following table describes the available actions in the Ethernet Networks (External Connections)
screen. Clicking another link in the pull-down menu or left navigation window causes current edits that
have not been applied to be lost.
Task Action
Sort list view Click the down arrow next to the Show box to display All Networks, or
one specific network.
Edit a network Click on the name of the network in the table listing.
Edit a shared uplink set Click on the name of the shared uplink set in the table listing.
Define a new network Click Define Network.
Illuminate the PID for all uplink
ports associated with a network Click on the circle next to the network in the list.
View a printable report Click the print icon.
Ethernet Networks (Server Connections) screen
To access this screen, click the Ethernet Networks link in the left VC Manager navigation window, and
then click the Server Connections tab.