HP 3PAR Service Processors - Manual (Page 23)

3PAR Service Processor User’s Guide
3.1
SP Control Functions
3
SP Control Functions
In this chapter
3.1 Setting Up the Network for the Service Processor 3.2
3.2 Displaying Firewall Status or Altering Firewall Rules 3.2
3.3 Mounting or Unmounting a CD-ROM 3.4
3.4 Stopping/Starting InServ-Related Processes 3.4
3.5 Changing the SP Default Route 3.5
3.6 Changing the SP IP Address 3.5
3.7 Changing the Service Processor Netmask 3.6
3.8 Changing the Service Processor Default Gateway 3.6
3.9 Changing Transfer Media Settings 3.7
3.11 Administrating an SP File Transfer Trigger 3.9
3.12 Managing Date and Time Settings 3.10
3.13 Managing NTP Configuration 3.11
3.14 Defining the Service Processor Process Control Parameters 3.13
3.15 Running a SPLOR or an MSPLOR 3.16
3.16 Maintaining Service Processor Software 3.16