HP 3PAR Service Processors - Manual (Page 54)

5.6 Managing Connection Portal Controls
3PAR Service Processor User’s Guide
2 Verify the following requirements message, type Y and press ENTER to continue.
1) Will the connection to the 3PAR Collector Server require a
proxy?
1a) If so,
I) Is the Proxy Server configured to allow us to
establish SSL sessions with the Collector Server, and
II) Do you know the name or address of the proxy, the
type of proxy (socks or http), the port it listens on, and any
required authentication credentials?
1b) If no proxy is to be used for the Collector, has the
Customer network / firewall been provisioned to allow us to
establish outbound SSL connections to the Collector Server?
2) Will the Customer be using a Policy Manager?
2a) If so,
I) Is it installed and configured for use?
II) will it require a proxy for the SP to reach it,
has it been configured to allow us to use it, and do you know the
name/address,port, type, and authentication details for the
proxy?
III) Do you know the name/address of the Policy
Manager,and the port it listens on? Is it available for us to
connect to?
2b) If not, what initial setting does the customer want for
the CCA?
3) Will we use DNS?
3a) If so, do you know the addresses of one, or more, DNS
servers that we can query, as well as the domain name of the
customer's network?
If you do not know the anwers to any of these questions, you will
not be able to complete the configuration of Secure Network Mode.
Please do not attempt it if you do not know.
WARNING!
Once Secure Network Mode is configured, ONLY the customer has the
authority level to deconfigure it.
Are you ready to configure Secure Network Mode?(y or n)
y