HP 3PAR Service Processors - Manual (Page 24)

3.2 Setting Up the Network for the Service Processor
3PAR Service Processor User’s Guide
3.17 How to Maintain Service Processor Files 3.18
3.1 Setting Up the Network for the Service Processor
The SP Network submenu allows you to manage the network and dialup settings for the
Service Processor.
To access the SP Network submenu, type the following menu options from the SP main menu:
1 Type 2 for Network Configuration and press ENTER .
2 Type 4 for Change Public Network Interface Parameters and press ENTER .
The current values are displayed along the right column. As you edit the values displayed in
this menu, the new values appear to the right of the current values. Modifications made with
this submenu are not permanent until they are saved or activated from this menu using menu
option A. The modifications are not retained if you quit this menu without saving or activating
them.
3.2 Displaying Firewall Status or Altering Firewall Rules
The SP Control FW (Firewall) submenu provides you with the ability to display and alter the
status of the Service Processor resident firewall.
3.2.1 Displaying Firewall Status
To access the SP Control FW submenu, select the following menu options from the SPMAINT
main menu:
1 Type 2 for Network Configuration and press ENTER .
2 Type 3 for Firewall Manipulation and press ENTER .
3 Type 1 for Display Firewall Status and press ENTER .