3 mounting or unmounting a cd-rom, 4 stopping/starting inserv-related processes, Mounting or unmounting a cd-rom – HP 3PAR Service Processors User Manual
Page 26: Stopping/starting inserv-related processes
3.4
Mounting or Unmounting a CD-ROM
3PAR Service Processor User’s Guide
3.3 Mounting or Unmounting a CD-ROM
When using a CD to deploy a software update or InForm installation via the Service Processor
(SP), the CD needs to be mounted and unmounted.
To mount a CD-ROM:
1
Insert a CD into the SP’s CD-ROM.
2
From the SPMAINT main menu, type 1 for SP Control/Status and press
ENTER
.
3
Type 9 for Mount a CDROM from the SP main menu and press
ENTER
.
4
When prompted, type y and press
ENTER
to mount the CD.
■
To unmount a CD-ROM:
1
Type 10 for Unmount a CDROM and press
ENTER
.
2
When prompted, type y and press
ENTER
to unmount the CD.
3
Remove the CD from the CD-ROM.
3.4 Stopping/Starting InServ-Related Processes
This feature allows you to stop and start the
spevent
and
spcollect
processes to a
particular storage server (InServ). It may be useful as a diagnostic to stop and then start the
InServ-related processes if you are having problems with the Service Processor (SP)
communicating with the storage server.
Unlike maintenance mode, stopping InServ-related processes does not attempt to limit or
accept events that can occur while InServ-related processes are stopped. When the processes
are restarted manually or as a result of restarting the SP, all pending events are transferred to
3PAR Central or a local service provider.
To stop or start InServ-related processes:
1
From the SPMAINT main menu, type 1 for SP Control/Status and press
ENTER
.
2
Type 4 for Stop InServ related Processes or 5 for Start InServ related Processes and
press
ENTER
.
3
Select the InServ to stop or start related processes and press
ENTER
.