9 changing transfer media settings, Changing transfer media settings – HP 3PAR Service Processors User Manual
Page 29
3.7
Changing Transfer Media Settings
3PAR Service Processor User’s Guide
3.9 Changing Transfer Media Settings
Use the SP Transfer Medias submenu to alter the settings for the media the Service Processor
(SP) uses when communicating with its associated connection portal.
The following settings can be found in the SP Transfer Medias submenu:
■
Data transfer involves external communications between the SP and the connection portal.
■
Remote operations include problem solving and diagnostics performed from a remote
location.
To access the SP Transfer Medias submenu:
1
From the SPMAINT main menu, type 2 for Network Configuration and press
ENTER
.
2
Type 5 for Change Transfer Media/SP Phone Number from the Networks menu and
press
ENTER
.
3
Type 1 for Data Transfer, and press
ENTER
.
4
Type Ethernet, Modem, or Off and press
ENTER
to change the method of data transfer.
The following subsections describe how to perform tasks related to each of the functions
available through the SP Transfer Medias submenu.
NOTE: You cannot change the Transfer Media Settings in Secure Network Mode.