1 changing the transfer media, 2 changing the remote operations transfer media, Changing the transfer media – HP 3PAR Service Processors User Manual

Page 30: Changing the remote operations transfer media

Advertising
background image

3.8

Changing Transfer Media Settings

3PAR Service Processor User’s Guide

3.9.1 Changing the Transfer Media

Use this sub option to alter the media the Service Processor uses for sending an event or alert

data and related files to a connection portal.

To change the transfer media:

1

From the SP Transfer Medias submenu, type 1, Data Transfer and press

ENTER

.

2

When the SP Transfer Medias Configuration menu appears, type E|e, M|m, or O|o and press

ENTER

. The SP Transfer Medias submenu appears.

3

Make any additional changes to Service Processor phone number and dial-in prefix as

necessary.

4

When finished, type A and press ENTER to quit, save, and activate the new transfer media

settings.

3.9.2 Changing the Remote Operations Transfer Media

Use this sub option to alter the media the Service Processor (SP) uses when conducting

problem-solving activities and diagnostics performed from a remote location.

To change the remote operations transfer media:

1

From the SP Transfer Medias submenu, type 2 for Remote Operations and press

ENTER

.

The SP Transfer Medias Configuration menu for remote operations appears

2

Type E|e for Ethernet,

M|m

for modem, or O|o for off and press

ENTER

.

The SP Transfer Medias submenu appears.

NOTE: The SP Transfer Medias submenu may show additional items. Changed

options appear to the right of the current values.

NOTE: The SP Transfer Medias submenu may show additional items. Changed

options appear to the right of the current values.

Advertising
This manual is related to the following products: