3 changing the time zone, 13 managing ntp configuration, Changing the time zone – HP 3PAR Service Processors User Manual
Page 33: Managing ntp configuration
3.11
Managing NTP Configuration
3PAR Service Processor User’s Guide
3.12.3 Changing the Time Zone
If altering the time zone setting for the Service Processor, answer the following guided menus
and press
ENTER
to confirm the following information:
■
Continent or ocean
■
Country
■
Time zone region
Verify or set the date and time before continuing.
To change the time zone setting:
1
From the SP System Date/Time submenu, type 3 for Change the timezone and press
ENTER
.
2
When prompted, type y and press
ENTER
to launch the time zone configuration sequence.
3.13 Managing NTP Configuration
Use the Manage NTP Configuration (NTPCONF) submenu to manage the Service Processor
network time protocol (NTP) and NTP server configuration settings.
The SP serves the NTP for any attached InServ Storage Servers. This can be a closed time
domain (SP and storage servers), or the NTP can be a client of any number of customer NTP
servers.
To access the NTPCONF submenu:
1
From the SPMAINT main menu, type 1 for SP Control/Status and press
ENTER
.
2
Type 12 for Manage NTP Configuration and press
ENTER
.
The subsections that follow describe how to perform tasks related to each of the functions
available through the NTPCONF submenu.