6 querying status of the secure service agent, Querying status of the secure service agent – HP 3PAR Service Processors User Manual
Page 46
4.4
Querying Status of the Secure Service Agent
3PAR Service Processor User’s Guide
4.6 Querying Status of the Secure Service Agent
The option checks the current state of the Secure Service Agent agent.
From the CPMAINT main menu, select option 5, Query status of the SSAgent agent.
4.7 Reconfiguring the 3PAR Secure Service Policy Manager
This option allows you to add or reconfigure a Policy Manager to the Secure Service Agent.
1
From the CPMAINT main menu, select option 6, Reconfigure the 3PAR Secure Service
Policy Manager.
2
At the prompt, tpe yes or no if Policy Manager is to be used.
3
Enter the hostname or IP address of the Policy Manager.
4
Enter the port number (8080 is the default).
5
At the prompt, tpe yes or no if a proxy server is required to connect to the Policy Manager.
6
Type yes or no if the entered data is correct.
4.8 Reconfiguring the 3PAR Secure Service Collector Server
This option allows you to add or reconfigure a Secure Service Collector Server to the Secure
Service Agent.
1
From the CPMAINT main menu, select option 7, Reconfigure the 3PAR Secure Service
Collector Server.
2
Select the correct Secure Service Collector Server from the list.
3
At the prompt, tpe yes or no if a proxy server is required to connect to the Collector Server.
4
Type yes or no if the entered data is correct.