HP ProLiant BL20p G4 Server-Blade - Manual (Page 29)

Hardware options installation 29
3. Install the hard drive.
4. Determine the status of the hard drive from the hot-plug hard drive LEDs. (" SAS and SATA hard drive
LED combinations " on page 9 , " SAS and SATA hard drive LEDs " on page 8 )
5. Resume normal server operations.
Multifunction network adapter option
To install the component:
1. Back up all server blade data.
2. Power down the server blade (on page 15 ).
3. Remove the server blade (on page 16 ).
4. Remove the access panel (on page 16 ).
5. Install the multifunction network adapter.
6. Install the access panel (on page 17 ).
7. Install the server blade (" Installing a server blade " on page 20 ).