HP Ethernet 10Gb 2-port 530T Adapter - Manual (Page 31)

Scripting mode 31
Dumping Configuration of Device [00:10:18:C7:5F:62] to outdata.txt ...done.
Dumping Configuration of Device [00:00:00:00:00:00] to outdata.txt ...done.
Dumping Configuration of Device [00:00:00:00:00:00] to outdata.txt ...done.
Dumping Configuration of Device [B8:AC:6F:93:86:BA] to outdata.txt ...done.
Dumping Configuration of Device [00:10:18:57:20:00] to outdata.txt ...done.
Dumping Configuration of Device [00:10:18:57:20:01] to outdata.txt ...done.
The following example dumps the configuration of all devices to stdout. In a DOS environment, terminal
scrolling control uses the default -termlines=25 and -termwidth=80.
C:\test\7.8.21\ccmcfg32 –get -stdout
;***********************************************************************
;CCMCFG32 v7.8.21 - Comprehensive Configuration Management
;Copyright (C) 2000-2013 Broadcom Corporation
; Dumping Configuration Parameters of Device [00:00:00:00:00:00] to STDOUT
;***********************************************************************
[Device Parameters]
MAC Address = 00:00:00:00:00:00
PCI Function Number = 03:00:01
Device Type = BCM5717
Vendor ID = 0x14E4
Device ID = 0x1655
Subsystem Vendor ID = 0x14E4
Subsystem Device ID = 0x1655
[Section MBA Configuration Menu]
Option ROM = Enabled
Boot Protocol = iSCSI
Boot Strap Type = Auto
Hide Setup Prompt = Disabled
Setup Key Stroke = Ctrl-S
Banner Message Timeout = 4 Seconds
Link Speed = AutoNeg
Pre-boot Wake On LAN = Enabled
VLAN Mode = Disabled
VLAN ID = 1
...
The following example dumps the second card of information to stdout.
C:\test\7.8.21>ccmcfg32 -get -stdout -card 1
;***********************************************************************
;CCMCFG32 v7.8.21 - Comprehensive Configuration Management
;Copyright (C) 2000-2013 Broadcom Corporation
; Dumping Configuration Parameters of Device [00:10:18:6F:D2:76] to STDOUT
;***********************************************************************
[Device Parameters]
MAC Address = 00:10:18:6F:D2:76
PCI Function Number = 01:00:01
Device Type = BCM57712
Vendor ID = 0x14E4
Device ID = 0x1662
Subsystem Vendor ID = 0x14E4
Subsystem Device ID = 0x1213
[Section Device Hardware Configuration]
Multi-Function Mode = NPAR
DCB Protocol = Disabled
SR-IOV = Disabled
Max Number of PF MSIX Vectors = 0
[Section MBA Configuration Menu]
Option ROM = Enabled
Boot Protocol = Preboot Execution Environment (PXE)