HP Ethernet 10Gb 2-port 530T Adapter - Manual (Page 37)

Scripting mode 37
;Configure WWPN:
WWPN = < String (0 to 16 Chars) > ; current = 0000000000000000
;Configure target Boot LUN number:
Boot LUN = <Integer (0 to 255)> ; current = 0
[No.2 Target Parameters]
;Enable/Disable Target Establishment:
Connect = < Enabled | Disabled > ; Current = Disabled
;Configure WWPN:
WWPN = < String (0 to 16 Chars) > ; current = 0000000000000000
;Configure target Boot LUN number:
Boot LUN = <Integer (0 to 255)> ; current = 0
[No.3 Target Parameters]
;Enable/Disable Target Establishment:
Connect = < Enabled | Disabled > ; Current = Disabled
;Configure WWPN:
WWPN = < String (0 to 16 Chars) > ; current = 0000000000000000
;Configure target Boot LUN number:
Boot LUN = <Integer (0 to 255)> ; current = 0
[No.4 Target Parameters]
;Enable/Disable Target Establishment:
Connect = < Enabled | Disabled > ; Current = Disabled
;Configure WWPN:
WWPN = < String (0 to 16 Chars) > ; current = 0000000000000000
;Configure target Boot LUN number:
Boot LUN = <Integer (0 to 255)> ; current = 0
[No.5 Target Parameters]
;Enable/Disable Target Establishment:
Connect = < Enabled | Disabled > ; Current = Disabled
;Configure WWPN:
WWPN = < String (0 to 16 Chars) > ; current = 0000000000000000
;Configure target Boot LUN number:
Boot LUN = <Integer (0 to 255)> ; current = 0
[No.6 Target Parameters]
;Enable/Disable Target Establishment:
Connect = < Enabled | Disabled > ; Current = Disabled
;Configure WWPN:
WWPN = < String (0 to 16 Chars) > ; current = 0000000000000000
;Configure target Boot LUN number:
Boot LUN = <Integer (0 to 255)> ; current = 0