HP Ethernet 10Gb 2-port 530T Adapter - Manual (Page 16)

Menu mode 16
For BCV-based iSCSI ROM, the Boot To Target and Target as First HDD parameters are not applicable and
are hidden.
Initator Parameters menu
The following table describes iSCSI boot initiator parameter configuration options.
iSCSI boot initiator
parameter
Description
IP Address iSCSI boot initiator IP address
Subnet Mask Subnet mask of iSCSI boot initiator
Default Gateway
Default gateway of iSCSI boot initiator
Primary DNS Primary DNS of iSCSI boot initiator
Secondary DNS Secondary DNS of iSCSI boot initiator
iSCSI Name IQN name of iSCSI boot initiator
CHAP ID
iSCSI boot initiator CHAP ID (valid when CHAP authentication is enabled)
CHAP Secret iSCSI boot initiator CHAP secret (valid when CHAP authentication is enabled)