HP Ethernet 10Gb 2-port 530T Adapter - Manual (Page 30)

Scripting mode 30
Log file
The -set operation logs the following information for each device:
• The difference between configuration file and current configuration on the card
• Any syntax errors detected while parsing the script file
• Any error and warning while trying to set the value such as invalid value
The log file name is <MAC[last four digits]>.log. The log is formatted in conformance with the
scripting file format. Error and warning messages start with a semicolon so you can use the log file as a
configuration file. Use the -stderr command option to output the log file content to STDERR at the same
time.
Script command example
The following examples show ways to use the -list, -get, -set, and -getItemGuide operations.
-list operation
C:\test\7.8.21>ccmcfg32 -list
Card# BUS Device Config MAC Address
====== ========= ========= ====== =================
0 1:00:00 BCM57712 IFA 00:10:18:6F:D2:74
1 1:00:01 BCM57712 IFA 00:10:18:6F:D2:76
2 2:00:00 BCM57810 IFNA 00:10:18:C7:5F:60
3 2:00:01 BCM57810 IFNA 00:10:18:C7:5F:62
4 3:00:00 BCM5717 I 00:00:00:00:00:00
5 3:00:01 BCM5717 I 00:00:00:00:00:00
6 4:00:00 BCM5722 I B8:AC:6F:93:86:BA
7 5:00:00 BCM5720 I 00:10:18:57:20:00
8 5:00:01 BCM5720 I 00:10:18:57:20:01
*: Configure Block Letters: I:iSCSI; F:FCoE; N:Nic Partition; A:AFEX
-get operation
The following example dumps the configuration of each device into a file named <MAC[last four
digits]>.CFG.
C:\test\7.8.21>ccmcfg32 -get
Dumping Configuration of Device [00:10:18:6F:D2:74] to 186FD274.CFG ...done.
Dumping Configuration of Device [00:10:18:6F:D2:76] to 186FD276.CFG ...done.
Dumping Configuration of Device [00:10:18:C7:5F:60] to 18C75F60.CFG ...done.
Dumping Configuration of Device [00:10:18:C7:5F:62] to 18C75F62.CFG ...done.
Dumping Configuration of Device [00:00:00:00:00:00] to 00000000.CFG ...done.
Dumping Configuration of Device [00:00:00:00:00:00] to 00000000.CFG ...done.
Dumping Configuration of Device [B8:AC:6F:93:86:BA] to 6F9386BA.CFG ...done.
Dumping Configuration of Device [00:10:18:57:20:00] to 18572000.CFG ...done.
Dumping Configuration of Device [00:10:18:57:20:01] to 18572001.CFG ...done.
The following example dumps the configuration of all devices in the platform into a single file named
outdata.txt.
C:\test\7.8.21>ccmcfg32 -get outdata.txt
Dumping Configuration of Device [00:10:18:6F:D2:74] to outdata.txt ...done.
Dumping Configuration of Device [00:10:18:6F:D2:76] to outdata.txt ...done.
Dumping Configuration of Device [00:10:18:C7:5F:60] to outdata.txt ...done.