HP Virtual Connect Enterprise Manager Software - Manual (Page 38)

VC Domain Group configuration replicated to other VC Domains during VC Domain Maintenance
IMPORTANT: The VC Domain, network, and storage configuration changes performed during VC Domain
Maintenance are automatically replicated to all other VC Domains that belong to the same VC Domain
Group when the VC Domain that maintenance operation is confirmed or discarded.
The following information is replicated to all VC Domains in the VC Domain Group during VC Domain
Maintenance:
•
Domain settings
Configuration for double density servers (for example, BL2x220c)
•
•
Configuration for full-height and half-height single density servers (for example, BL460c, BL480c)
•
Ethernet settings
MAC Cache Failover:
•
•
Enable Fast MAC Cache Failover
•
MAC Refresh Interval
•
IGMP (Internet Group Management Protocol) Snooping:
Enable IGMP Snooping
•
•
IGMP Idle Timeout Interval
•
Server VLAN Tagging Support:
Tunnel VLAN Taggings or Map VLAN Taggings
•
•
Force server connection setting
•
Multiple Network Speed Settings:
Preferred Link Connection
•
•
Preferred Link Connection Speed
•
Maximum Link Connection
•
Maximum Link Connection Speed
•
Network SNMP settings:
•
Enable SNMP
•
Read Community
•
System Contact
•
Each SNMP trap defined community and IP address
•
Fibre Channel SAN fabric settings:
Enable SMI-S
•
•
Fibre Channel SNMP settings:
•
Enable SNMP
•
Read Community
•
System Contact
•
Each SNMP trap Community and IP address
•
For each Fibre Channel fabric:
Fabric name
•
•
For each network uplink:
Name
•
•
State
38 Managing VC Domains