Prerequisites, Removing hp iiascim server v2.0 from esxi 5.x – HP Intelligent Infrastructure Analyzer Software User Manual
Page 11
4 Installing, and removing HP IIASCIM Server v2.0 for ESXi
5.x
NOTE:
HP IIASCIM Server must be installed on the host platform which can be monitored by HP
IIAS. This server provides a CIM interface to HP IIAS, and enables data collection.
Prerequisites
To successfully install HP IIASCIM Server, the following parameters in the SFCB config file on the
ESXi machine (/etc/sfcb.cfg) must be modified: httpProcs, doBasicAuth, and
httpLocalOnly
as shown in the following table.
New value of parameter as modified by HP IIASCIM
Server Installer
Default value of parameter
Parameter
10
2
httpProcs
False
True
doBasicAuth
False
True
httpLocalOnly
NOTE:
These changes can affect other providers which use the SFCB. If these changes are not
allowed, HP IIASCIM Server will not be installed.
•
Ensure that the root user access to the system is available.
•
The IIASCIMServer_ESXi.sh script must have executable permissions. If it does not have
the executable permissions, run the following command:
#chmod +x ./IIASCIMServer_ESXi.sh
To install HP IIASCIM Server v2.0 package for ESXi 5.x:
1.
Download HP IIASCIM Server v2.0 package for ESXi 5.x from the HP IIAS website:
.
2.
Select a folder (for example, /vmfs/volumes/datastore1/temp), and save the HP
IIASCIM Server v2.0 package.
3.
Untar the fileIIASCIMServer-2.0.0.0-0.ESXi.tar .
4.
Run ./IIASCIMServer_ESXi.sh script, and follow the steps to install the HP IIASCIM
Server v2.0 files.
NOTE:
•
If IIASCIM Server is not installed, then the installer installs a fresh copy of the IIASCIM Server.
•
If the same version of IIASCIM Server is available, then the installer prompts for an
uninstallation.
•
See the
for the set of supported platforms.
•
Qlogic recommends FC-FCoE driver version 1.1.11.0 or above for ESXi.
Removing HP IIASCIM Server v2.0 from ESXi 5.x
To remove HP IIASCIM Server v2.0 for ESXi 5.x:
1.
Go to the location where the IIASCIM Server v2.0 for ESXi 5.x is installed.
2.
Run the ./IIASCIMServer_ESXi.sh script.
Prerequisites
11