HP Intelligent Infrastructure Analyzer Software - Manual (Page 41)

Table 11 Classification of Diagnostic events
Description Type
If the SFP parameter value is crossed, then a Critical event is raised by HP IIAS. This may
mean degrading or degraded/failed. This may result in connectivity loss. Critical
If the SFP monitored parameters are crossing the warning threshold limit, then a Warning
event is raised by HP IIAS. This may mean a degrading SFP or a degraded cable. This may
result in connectivity loss. Major
HP IIAS observes normal readings for SFP monitored parameters, then informational event is
raised by HP IIAS. Informational
Firmware prerequisites for SFP diagnostics
SFP monitoring and diagnostics require:
•
A B-Series switch that has firmware version 7.x or later.
•
A H-Series switch that has firmware version 8.0.14.03.00 or 8.0.4.04.00 or higher.
•
An HP Branded 8/16Gb QLogic HBA with any firmware.
•
HP FlexFabric 5900CP and 5900AF switches with firmware 7.1.045 release 2309 or higher.
NOTE:
•
SFP monitoring and diagnostics are not performed for components that do not meet the above
mentioned requirements.
Firmware prerequisites for SFP diagnostics specific to 3PAR storage device
SFP monitoring and diagnostics requires:
•
3PAR storage device with Inform OS 3.1.2 and above.
SAN Diagnostic GUI
The columns in the table display the event attributes that are:
•
ID—Displays the diagnostic ID (for example: D1).
•
Severity—Displays the severity level of the event.
•
Component
•
Time—Displays the time when the event was generated.
•
Description—Displays the diagnostic solution.
Event Manager 41