HP ProLiant ML110 G2 Server - Manual (Page 27)

Hardware options installation 27
Installing the LED cable (ML150 G3)
Connector location (ML150 G3)
Cabling an HP Smart Array E200 controller card (ML150 G3)
1. Power down the server (on page 6 ).
2. Remove the access panel (" Access panel " on page 11 ).
3. Install the card.
For more information, see the documentation that ships with the option and see "Expansion board
options (on page
42 )."
4. Connect the LED cable to the card and to the system board.
5. Unfasten the cable tie.