HP ProLiant ML110 G2 Server - Manual (Page 70)

Troubleshooting 70
NOTE: For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
• Improperly seated or faulty internal or external component
• Unsupported component installed
• Redundancy failure
• System overtemperature condition
Item See
1 Server maintenance and service guide, located on the Easy Set-up CD, the
support CD, or the HP website
(
http://www.hp.com/products/servers/platforms )
2 "Power-on problems flowchart (on page 64 )"
3
"HP Insight Diagnostics (on page 48 )"
4 • "Hardware problems (on page 71 )"
• Server maintenance and service guide, located on the Easy Set-up CD,
the support CD, or the HP website
( http://www.hp.com/products/servers/platforms )
5 "HP contact information (on page 103 )"