HP ProLiant ML110 G2 Server - Manual (Page 16)

Hardware options installation 16
7. Install the heatsink. Refer to the installation sheet for server-specific installation instructions.
8. Install the PPM (if applicable). Refer to the server hood labels or user documentation for specific
information on how to install a PPM.
9. Install the access panel.
Installing a processor in HP ProLiant ML110 Generation 5 Servers
The server uses an embedded PPM as a DC-to-DC converter to provide the proper power to the processor.
To install the component:
1. Power down the server (on page 6 ).
2. Extend the server from the rack.
3. Remove the access panel (" Access panel " on page 11 ).