HP Integrity NonStop J-Series - Manual (Page 186)

Slot Location:
CRU: Power supply CRUs are located in slots 31 and 32 of enclosures containing IOMF2 CRUs.
Example: Power Supply (1.1.31)
Attributes
Power Supply
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values
Service State
Physical
Identifies the manufacturer of the component. Manufacturer
The state of the power supply CRU as known to the operating system on the
server.
Values
NOTE: Not displayed for an IOMF or NonStop S7000 PMF CRU.
Power State
Logical
The initial state of the power supply component at the time of discovery.
Values
Enabled State
The state of the component as known to the operating system on the server.
Values
Device State
Actions
Replace
Launches an interactive action to guide you through replacement of a power supply CRU. This
action is applicable for IOMF2 and most PMF enclosures. It is not applicable for S7000 PMF or
IOMF CRUs (in which the power supply is not a customer-replaceable unit). The steps include:
186 System Resources