Power cords – HP ProLiant DL760 G2 Server User Manual
Page 249
Regulatory Compliance Notices
Power Cords
The power cord set included in your server meets the requirements for use in the
country where you purchased your server. If you need to use this server in another
country, you should purchase a power cord that is approved for use in that country.
The power cord must be rated for the product and for the voltage and current marked
on the product’s electrical ratings label. The voltage and current rating of the cord
should be greater than the voltage and current rating marked on the product. In
addition, the diameter of the conductors must be a minimum of 1.50 mm
2
or 16AWG,
and the length of the cord must be between 1.8 m (6 feet) and 3.6 m (12 feet). If you
have questions about the type of power cord to use, contact your HP authorized
service provider.
A power cord should be routed so that it is not likely to be walked on or pinched by
items placed upon it or against it. Particular attention should be paid to the plug,
electrical outlet, and the point where the cord exits from the product.
A-6
HP ProLiant DL760 Generation 2 Server User Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: k-appa Regulatory Compliance Notices.doc
Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/17/03 10:17 AM