Non-hot-plug i/o expansion, Non-hot-plug i/o expansion -7 – HP ProLiant DL760 G2 Server User Manual
Page 96
Installing Hardware Options, Server Power Off
8. Install the SCSI terminator supplied on the other external SCSI connector on the
rear panel of the external storage device.
Figure 4-5: Connecting an external mass storage device
9. Restore power to the external storage device.
10. Connect all power cords and power up the server. Refer to Chapter 7 for more
information.
11. To configure the device, refer to the documentation provided with the external
storage device.
Non-Hot-Plug I/O Expansion
The PCI/PCI-X slots of the ProLiant DL760 G2 server I/O board support a variety of
industry-standard expansion boards.
WARNING: To reduce the risk of personal injury from hazardous energy or
damage to the equipment when working on energized servers:
•
Remove all watches, rings, and any other loose-fitting jewelry.
•
Avoid the use of conductive tools that could bridge live parts.
HP ProLiant DL760 Generation 2 Server User Guide
4-7
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: e-ch4 Installing Options-Power Off.doc
Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/17/03 9:32 AM