HP ProLiant DL760 G2 Server - Manual (Page 281)

Troubleshooting Information
Table E-5: Are all of the System Interconnect Status LED Indicators Off? continued
Refer to “System Interconnect LED Indicators” in Appendix D.
Yes There is a broken connection between the
I/O board and the power switch.
A power supply problem may exist. The
power supply may not be connected or
inserted properly, may have a damaged
connector, or may have failed.
The system midplane may need to be
replaced.
• Check the power source to
verify that an adequate
supply of AC power exists.
• Remove the power supply
and check for a damaged
connector. If the connector
appears okay, reinsert the
power supply, firmly and
correctly.
• Verify the proper
connection of all power
cables.
Refer to the HP Servers
Troubleshooting Guide for
further options.
HP ProLiant DL760 Generation 2 Server User Guide E-13
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: o-appe Troubleshooting Information.doc
Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/17/03 10:42 AM