HP Color LaserJet CM2320 Multifunction Printer series - Manual (Page 150)

If the fax number you are calling has a speed dial or group-dial entry, press Fax Menu , then use
the arrow keys to select Phone Book. Choose Select an entry and use the alphanumeric buttons
to specify the speed dial or group-dial entry, and then press
OK .
5. On the control panel, press Start Fax . The product starts the fax job.
Manual dial faxing
Usually, the product dials after you press Start Fax . At times, however, you might want the product to
dial each number as you press it. For example, if you are charging your fax call to a calling card, you
might need to dial the fax number, wait for the acceptance tone of your telephone company, and then
dial the calling card number. When dialing internationally, you might need to dial part of the number and
then listen for dial tones before continuing to dial.
Dial manually with the automatic document feeder (ADF)
1. Load the document into the automatic document feeder (ADF) input tray.
2. On the control panel, press Start Fax .
3. Begin dialing.
NOTE: The product dials the number as you press each digit. This allows you to wait for pauses,
dial tones, international-access tones, or calling-card-acceptance tones before continuing to dial.
Dial manually with the flatbed scanner
1. On the control panel, press Start Fax .
The control-panel display shows the following message: Send from flatbed scanner?.
2. Select Yes. The control-panel display shows the following message: Load page: X Press OK,
where X is the page number.
3. Scan a page into memory by placing the sheet print-side-down on the flatbed scanner and pressing
OK . After scanning the page, the product control-panel display shows the following message: Scan
another page?.
4. If you have more pages to scan, select Yes, and then repeat step 3 for each page of the fax job.
-or-
If you are finished, select No, and then go to the next step.
5. When all pages are scanned into memory, begin dialing. The product dials the number as you
press each digit. This allows you to wait for pauses, dial tones, international access tones, or calling
card acceptance tones before continuing to dial.
138 Chapter 12 Fax (fax models only) ENWW