HP Color LaserJet CM2320 Multifunction Printer series - Manual (Page 230)

9. Close the ADF lid.
Avoid repeated jams
● Verify that the input tray is not overfilled. The input tray capacity varies depending on the type of
print media that you are using.
● Verify that the media guides are properly adjusted.
● Check that the input tray is securely in place.
● Do not add print media into the input tray while the product is printing.
● Use only HP-recommended media types and sizes. See Paper and print media on page 53 for
more information about print media types.
● Do not fan media prior to loading it in a tray. To loosen the ream, hold it firmly in both hands and
twist the media by rotating your hands in the opposite direction.
● Do not let print media stack up in the output bin. The print media type and the amount of toner used
affect the output bin capacity.
● Check the power connection. Make sure that the power cord is firmly connected to both the product
and the power supply box. Plug the power cord into a grounded power outlet.
218 Chapter 15 Problem solve ENWW