Creating a thp/smart pool – HP XP Array Manager Software User Manual
Page 60
If a Tiered Storage Manager license has been registered, user can use the Mobility tab to evaluate
and analyze the operation status that is related to a THP/Smart pool. When you delete an unnecessary
THP/Smart pool, THP/Smart volumes created from that pool are also deleted. For this reason, a
prerequisite to deleting a THP/Smart pool is that no THP/Smart volumes from that pool are allocated
to a host.
Related topics
• Verifying THP/Smart pool information
• Modifying THP/Smart pool settings
Creating a THP/Smart pool
You can create a THP/Smart pool using physical volumes. Creating a THP/Smart pool provides more
efficient use of physical storage for virtual volumes allocated to hosts from the THP/Smart pool.
Prerequisites
Tasks to complete beforehand:
•
Register the target storage system.
•
When defining an external LDEV tier rank, externally connect a storage system that has multiple
performance levels.
•
Verify the following when using XP24000/20000 and HP XP P9500 Storage for THP pools:
• Only parity groups from which volumes have already been created can be targets
•
Verify the following when using HP XP P9500 Storage for Smart pools:
• Hardware tier: drive type and drive speed (RPM)
• Only parity groups for each hardware tier from which volumes have already been created
can be targets
1.
On the Resources tab you can create pools from several locations:
• From General Tasks, select Create Pool.
• Select the storage system, list existing THP Pools, and click Create Pool.
• Select the storage system, list existing THP Pools, and click Actions, then select Create Pool.
2.
In the create pool dialog box, configure THP or Smart pools and their characteristics.
NOTE:
If you want to manually monitor or relocate Smart pools, set Tier Management in
Smart Options to Manual.
Managing storage resources in a SAN environment
60