HP OneView for VMware vCenter - Manual (Page 61)

Viewing virtual disks
The virtual disks page displays the following information:
•
Virtual Disk Name—Virtual disk name assigned by VMware
•
Virtual Disk Type—Virtual disk type (VMDK or RDM)
•
Virtual Machine—Name of the VM associated with the selected VMDK or RDM
•
Datastore—Datastore name or the .vmdk name for the RDM
•
Provisioned Capacity—Disk capacity visible to a VM using this VMDK or RDM
•
Allocated Capacity—Disk capacity reserved by VMware for the VMDK or RDM
For an RDM, this value will match the provisioned capacity value. For a VMDK, this value
might be less than the provisioned capacity value if VMware thin provisioning is used. This
is separate from thin provisioning configured in the storage system.
•
VMware Provisioned—Thick or thin
Viewing HBAs
The HBAs page displays the following information:
•
Host Names—Host name or cluster host names
•
Type—HBA type
•
VMware Device Identifier—HBA identifier assigned by VMware
•
WWN/IQN—HBA WWN
NOTE: No HBA WWN address is available for HP MSA 2000 G2/HP MSA P2000 G3
SAS arrays.
•
Label—HBA identifier assigned by VMware
Viewing paths
The paths page displays the following information:
•
Array Disk Name
HP StoreVirtual—Volume name ◦
◦ HP 3PAR StoreServ—Volume name
◦ HP EVA—Path for the virtual disk on the storage system
◦ HP MSA 2000 G2/HP MSA P2000 G3—Volume name
◦ HP XP P9000/HP XP—Emulation type and LDKC:CU:LDEV (for example, HP OPEN-V-CVS
(00:04:3F))
◦ HP StoreOnce Backup—Not applicable
•
Array Name
HP StoreVirtual—Management group name ◦
◦ HP 3PAR StoreServ—Array display name
◦ HP EVA—Array display name
◦ HP MSA 2000 G2/HP MSA P2000 G3—System name
Using the Storage Module for vCenter 61