HP OneView for VMware vCenter - Manual (Page 63)

◦ HP XP P9000/HP XP—Port number
◦ HP StoreOnce Backup—Not applicable
•
Host Group
HP StoreVirtual—Name configured for the host's IQN in the management console ◦
◦ HP 3PAR StoreServ—Name of the host object containing the host WWN for this path
◦ HP EVA—Name of the host object containing the host WWN for this path
◦ HP MSA 2000 G2/HP MSA P2000 G3—Nickname of the host with the host WWN for
this path
◦ HP XP P9000/HP XP—Name of the host group containing the HBA WWN on the array
port for this path
◦ HP StoreOnce Backup—Not applicable
•
Host Access
HP StoreVirtual—Host access level assigned to the presentation of the disk to the host (for
example, READ/WRITE or READ-ONLY) ◦
◦ HP 3PAR StoreServ—N/A. 3PAR storage volumes operate in a read-only/read-write
configuration.
◦ HP EVA—Host access level assigned to the presentation of the disk to the host (for example,
READ/WRITE or READ-ONLY)
◦ HP MSA 2000 G2/HP MSA P2000 G3—Access setting for volume mapping (for example,
READ/WRITE or READ-ONLY)
◦ HP XP P9000/HP XP—Host access level assigned to the volume
NOTE: The HP XP P9000/HP XP array does not allow host access to be specified on
a per-host or per-path basis.
◦ HP StoreOnce Backup—Not applicable
•
Array Port Speed
HP StoreVirtual—Not applicable ◦
◦ HP 3PAR StoreServ—Speed at which the port is connected to the SAN (Gb/s)
◦ HP EVA—Speed at which the port is connected to the SAN (Gb/s)
◦ HP MSA 2000 G2/HP MSA P2000 G3
FC—Speed at which the port is connected to the SAN (Gb/s) –
– iSCSI—Speed at which the network port is connected to the network (Gb/s)
– SAS—Speed at which the port is connected to the host or switch (Gb/s)
◦ HP XP P9000/HP XP—Speed at which the port is connected to the SAN (Gb/s)
◦ HP StoreOnce Backup—Not applicable
Using the Storage Module for vCenter 63