HP StorageWorks XP Direct Backup Engine Software - Manual (Page 43)

Specifications 43
Specifications
For the latest specifications and requirements, please check with your HP
representative.
Item Requirement and/or Restriction
Host server
Platform and operating system Sun Solaris 2.6 or later
HP-UX 11.0
Backup application VERITAS NetBackup 4.5
I/O interface Fibre Channel interface
XP port configuration and interface
Maximum number target ports per subsystem 30
Maximum number of initiator ports per subsystem 16
Protocol type between host target and initiator backup device SCSI-FCP
Connection between initiator port and backup device Direct, FC Switch, or FC-ATM converter connection
I/O interface
Target port (connection to the host):
Initiator port (connection to the backup device):
Fibre Channel interface only.
Fibre Channel (CHF)
Fibre Channel (CHF)
Maximum number of commands that can be executed at the
same time
64
Backup device
Backup device type Tape drive: HP Surestore Tape Libraries
(DTL7000, DTL8000, Ultrium with FC bridge/router)
Disk: XP Disk Array
appendix