HP Insight Cluster Management Utility - Manual (Page 17)

NOTE: These IDE settings only apply to the DL160 G5 Server.
•
IPMI
Serial Port assigned to System ◦
◦ Serial Port Switching Disabled
◦
Serial Port Connection Mode Direct
•
LAN
Share NIC mode Disabled ◦
◦
DHCP Disabled
•
Remote Access
Remote access Enabled ◦
◦
Redirection Always
◦ Terminal VT100
•
Boot Configuration
Boot Order
◦
1. Embedded NIC
2. Disk or smart array
◦ Embedded NIC1 Enabled
2.1.7.3 DL160 G6 Servers
•
IPMI
Serial Port assigned to System ◦
◦ Serial Port Connection Mode Direct
•
PCI
NIC1 control Enabled ◦
◦ NIC1 PXE Enabled
•
SATA
SATA#1 Controller Mode AHCI ◦
•
Boot Configuration
Boot Order ◦
1. NIC
2. CD
3. Disk
2.1 Installing HP Insight CMU 17