HP Insight Cluster Management Utility - Manual (Page 95)

Figure 51 pdsh window
You can toggle the two filters on and off using dshbak or cmudiff. These two filters are mutually
exclusive, so you can:
•
Filter with cmudiff
•
Filter with dshbak
•
Use no filter
6.12.1 cmudiff examples
Example 1 date command
The cmudiff output is two fields separated by dotted lines. The header displays:
•
The number of responses, 4 in this example (This amount means a response has been received
from 4 compute nodes.)
•
The reference node (This is the node chosen by cmudiff as a reference. Differences in output
from this reference node are highlighted.)
•
The number of ignored lines
•
The number of output lines
The output line appears below the header. In this example, the output is only 1 line:
•
The “m”, which appears on the left, indicates that the output from some compute node differs
from the reference node.
6.12 Single window pdsh 95