HP XP P9000 Command View Advanced Edition Software - Manual (Page 132)

Starting Element Manager
Element Manager is a menu selection for launching native storage system management tools, which
allows you to remotely view, configure, and operate storage systems, including SMI-S enabled storage.
1. From the Resources tab, select Storage Systems.
2. Select a storage system. From the Actions menu (in the upper-right corner of the application area)
select Element Manager.
Confirm the storage system management tool is started and available for use.
NOTE:
The management tool sometimes cannot start with an SMI-S Enabled storage system because the URL
of management tool is incorrect. In this case, you need to perform either of the following operations:
• Use the AddURLLink command of Device Manager CLI to register in the Device Manager server
the URL of the management tool of the SMI-S Enabled storage system. For details about the Ad-
dURLLink command, see the HP P9000 Command View Advanced Edition Suite Software CLI
Reference Guide.
• Review the settings of the SMI-S provider, and then refresh the SMI-S Enabled storage system from
Device Manager.
Linking related products 132