HP Integrity NonStop H-Series - Manual (Page 56)

Configuring the M8521 Tape Library for the NonStop
S-Series Server
SL500 (M852x) Tape Library Installation and User’s Guide—541531-010
7 -2
Adding the Control Path and Data Path
To add the data path:
1. In SCF, issue this command:
SCF> ADD TAPE $tape, SENDTO STORAGE, LOCATION (group, module,
slot), SAC sac-id, PORTNAME 64-bit-portname, LUN lun-id
Example:
SCF> ADD TAPE $M8504, SENDTO STORAGE, LOCATION (110,2,2), SAC
2, LUN 0, PORT 50060B00002E69CD
2. To start the tape drive on the server, issue this command in SCF:
SCF> START TAPE $tape
Example:
SCF> START TAPE $M8504
For complete details about the ADD and STATUS commands, including command
syntax, see the
SCF Reference Manual for the Storage Subsystem.
Note.
The LUN (logical unit number) for all Fibre Channel tape storage devices directly
attached to the IOAM enclosure is 0.