HP Netserver E Server series - Manual (Page 93)

Chapter 10 Troubleshooting
87
8. Insert the new battery with the positive sign (+) facing up into the socket.
9. Press down on the center of the battery with your thumb, pushing the
battery down into the socket.
The battery should snap into place.
10. Ensure the spring latch holds the battery firmly.
11. Replace the cooling duct/cover and the NetServer cover.
12. Power on the NetServer and reset the CMOS settings.
Problems Running the Setup Utility
If you cannot run the Setup Utility, the HP NetServer’s configuration in CMOS
memory may have become corrupt. The only way to recover from a corrupted
configuration is to clear it. Refer to "Clearing the CMOS Configuration," earlier in
this chapter.