HP NonStop G-Series - Manual (Page 63)

Silo Media Manager Installation and Users Guide
Hardware and Software Installation for the Client 3-23
3.8.5.1 Setting the Defines
All new backups must be named, the cycle, date, and time must be selected, and the
subvolume to backup must be selected before the defines can be set. These defines
are used to select pre-labeled tapes and setup parameters for the run command of the
BACKUP utility. Figure 3-20 is Step 1 of setting the defines.
Figure 3-20 Set Defines Step 1
Figure 3-21 is Step 2 of setting the defines. Select a process name for the BACKUP.
Each BACKUP should have a unique name. If the process name field is left blank,
the Tandem will assign a process name.