Document Outline

• HP ProLiant BL45p Server Blade User Guide
• Notice
• Contents
• Component identification
  • Server blade components
    • Front panel LEDs
    • Front panel components
    • Hot-plug SCSI hard drive LED combinations
    • Rear panel components
    • Internal components
      • Primary system board (processors 1 and 2)
      • Secondary system board (processors 3 and 4)
    • System maintenance switch
  • Local I/O cable
  • Server blade enclosure bay numbering
  • iLO connections
  • Server blade enclosure compatibility
• Operations
  • Power up the server blade
  • Power down the server blade
  • Remove the server blade
• Setup
  • Installing the HP BladeSystem components
  • Verifying system components
  • Connecting to the network
  • Installing server blade options
  • Installing a server blade
  • Completing the configuration
• Hardware options installation
  • Processor option
    • Processor installation guidelines
    • Removing a processor blank and 1P enabler board
    • Processor installation
  • Memory option
    • DIMM guidelines
    • Single- and dual-rank DIMMs
    • DIMM numbering
      • Primary system board (processors 1 and 2)
      • Secondary system board (processors 3 and 4)
    • Installing DIMMs
  • Hard drive option
  • Fibre channel adapter option
  • Smart Array 6i Battery-Backed Write Cache Enabler option
• Local I/O cabling
  • Using the local I/O cable
  • Local administration using iLO
  • Connecting locally to a server blade with video and USB devices
    • Accessing a server blade with local KVM
    • Accessing a server blade with local media devices
• Configuration and utilities
  • Server blade deployment tools
    • Software drivers and additional components
    • ProLiant p-Class Advanced management
    • Network-based PXE deployment
      • Deployment overview
      • Deployment infrastructure
    • Static IP bay configuration
    • Deployment methods
      • PXE deployment
      • CD-ROM deployment
      • Diskette image deployment
      • SAN configuration
  • Configuration tools
    • SmartStart software
    • HP ROM-Based Setup Utility
      • Using RBSU
      • Auto-configuration process
      • Boot options
      • BIOS Serial Console
    • Array Configuration Utility
    • Option ROM Configuration for Arrays
    • Re-entering the server serial number and product ID
  • Management tools
    • Automatic Server Recovery
    • ROMPaq utility
    • Integrated Lights-Out technology
    • HP Systems Insight Manager
    • Management Agents
    • Redundant ROM support
      • Safety and security benefits
    • USB support
  • Diagnostic tools
    • HP Insight Diagnostics
      • Survey Utility
    • Integrated Management Log
  • Remote support and analysis tools
    • HP Instant Support Enterprise Edition
    • Web-Based Enterprise Service
    • Open Services Event Manager
  • Keeping the system current
    • Drivers
    • Resource Paqs
    • ProLiant Support Packs
    • Operating system version support
    • System online ROM flash component utility
    • Change control and proactive notification
    • Natural language search assistant
    • Care Pack
• Troubleshooting
  • Troubleshooting resources
  • Server diagnostic steps
    • Important safety information
      • Symbols on equipment
      • Warnings and cautions
  • Preparing the server for diagnosis
  • Symptom information
  • Service notifications
  • Loose connections
  • Diagnostic steps
    • Start diagnosis flowchart
    • General diagnosis flowchart
    • Server blade power-on problems flowchart
    • POST problems flowchart
    • OS boot problems flowchart
    • Server fault indications flowchart
  • POST error messages and beep codes
    • Introduction to POST error messages
    • Invalid memory types were found on the same node. Please check DIMM compatibility. - Some DIMMs may not be used
    • Fibre Channel Mezzanine/Balcony Not Supported.
    • Memory found on unpopulated Node. — Processor is required to be installed for memory to be used.
    • Mixed processor speeds detected. Please make sure that all processors are the same speed. — System Halted!
    • Node Interleaving disabled - Invalid memory configuration
    • There must be a first DIMM in pair if second DIMM in pair is populated. Second DIMM in pair ignored.
    • Unsupported DIMM(s) found in system. - DIMM(s) may not be used
    • 1610-Temperature Violation Detected. - Waiting 5 Minutes for System to Cool
• Regulatory compliance notices
  • Regulatory compliance identification numbers
  • Federal Communications Commission notice
    • FCC rating label
    • Class A equipment
    • Class B equipment
  • Declaration of conformity for products marked with the FCC logo, United States only
  • Cables
  • Modifications
  • European Union regulatory notice
  • Canadian notice (Avis Canadien)
  • Japanese notice
  • BSMI notice
  • Korean notice A&B
  • Battery replacement notice
  • Taiwan battery recycling notice
• Electrostatic discharge
  • Preventing electrostatic discharge
  • Grounding methods to prevent electrostatic discharge
• Specifications
  • Environmental specifications
  • Server specifications
• Technical support
  • Before you contact HP
  • HP contact information
  • Customer self repair
• Acronyms and abbreviations
• Index