HP SAN Virtualization Services Platform - Manual (Page 123)

Comments Description Property name
The status of the extent. Below is a list of
the allowed values:
• 0 ( Other )
• 1 ( Unknown )
• 2 ( None/Not Applicable|
• 3 ( Broken )
• 4 ( Data Lost )
• 5 ( Dynamic Reconfig )
• 6 ( Exposed )
• 7 ( Fractionally Exposed )
• 8 ( Partially Exposed )
• 9 ( Protection Disabled )
• 10 ( Readying )
• 11 ( Rebuild )
• 12 ( Recalculate )
• 13 ( Spare in Use )
• 14 ( Verify In Progress )
• 15..32767 ( DMTF Reserved )
• 32768..65535 ( Vendor Reserved )
The ExtentStatus of each segment will be
the status of the underlying stripe set mak-
ing the segment.
For StripeDetails, use the StripeDetails.
Status as follows:
• Status Normal: { 2 ("None/Not Applic-
able") }
• Status Partial: { 3 ("Broken") }
• eStatus Absent: { 1 ("Unknown") }
For Disk
• Status Undefined = { 1 ("Unknown") }
• Status Failed = { 3 ("Broken ") }
• eDiskStatus.DiskStatusPresent = { 2
("None/Not Applicable ") }
ExtentStatus
The number of blocks the segment
provides.
NumberOfBlocks
The maximum number of blocks, of size
BlockSize, which are available for con-
sumption when layering StorageExtents
using the BasedOn association.
Same as NumberOfBlocks ConsumableBlocks
The block size for a storage virtual disk. 512 BlockSize
If true, "Primordial" indicates that the con-
taining system does not have the ability to
create or delete this operational element.
False Primordial
Class associations
Property To Association Name
Antecedent
HPSVSP_VirtualDiskCompositeExtent :
CIM_CompositeExtent HPSVSP_VirtualDiskCompositeBasedOn :
CIM_BasedOn
Dependent
HPSVSP_ConfiguredComponentExtent :
CIM_StorageExtent HPSVSP_VirtualDiskSegmentBasedOn :
CIM_BasedOn
PartComponent
HPSVSP_StorageAppliance : CIM_Com-
puterSystem HPSVSP_SystemVirtualDiskSegment :
CIM_SystemDevice
SAN Virtualization Services Platform SMI-S User Guide 123