HP SAN Virtualization Services Platform - Manual (Page 228)

ModifySynchronization
Method overview
The ModifySynchronization method modifies (or starts a task to modify) the synchronization association
between two storage objects. If 0 is returned, the function completed successfully and no ConcreteJob
instance was created. If 0x1000 is returned, a ConcreteJob was started and a reference to this Job
is returned in the Job output parameter. A return value of 1 indicates the method is not supported. All
other values indicate some type of error condition.
The values that may be returned from an invocation of this method are:
• 0 ("Job Completed with No Error")
• 1 ("Not Supported")
• 2 ("Unspecified Error")
• 3 ("Time-out")
• 4 ("Failed")
• 5 ("Invalid Parameter")
• 6 ("In Use")
• 0x1000 ("Method Parameters Checked - Job Started")
5 ("Invalid Parameter") is returned if any of the following are true:
• The Operation argument is not specified or specifies an unsupported value.
• ElementName exceeds MaxLen.
• The Synchronization argument is not specified or does not identify an existing StorageSynchronized
instance.
Copy Services Profile 228