HP XP Performance Advisor Software - Manual (Page 123)

For more information on specifying common recipient email addresses for all alarm notifications,
see
“Configuring email and SNMP settings” (page 73) .
Prerequisites
Ensure that the following prerequisites are met before you configure alarm settings:
•
A valid source email address, and IP and port addresses of the SMTP servers are specified.
For more information, see
“Configuring email and SNMP settings” (page 73) . HP XP7
Performance Advisor uses the specified SMTP server details to dispatch email notifications to
the intended recipients.
•
Specify a community name (Public or Private) for the source SNMP server. By default, Public
is used as the community name.
You
can also specify a common subject line for all the alarm notifications, an appropriate title
for
the Good Information Alarm notifications, and community name (Public or Private) for the
source
SNMP server. For more information on setting the above-mentioned parameters, see
“Configuring
email and SNMP settings” (page 73)
.
IMPORTANT: By
default, HP XP7 Performance Advisor dispatches Good Information alarm
notifications.
However, if it is disabled, you must enable the Good Info Alarm Flag check box on
the
Email Settings screen to receive the XP7 Alarm - Good Information Alarm notifications. For
more
information, see
“Configuring
email and SNMP settings” (page 73)
.
To configure email and SNMP notifications:
1.
Click PA and DB Settings+Configure Alarms in the left pane.
2. In the Alarms table, select the component records for which you want to specify the threshold
level.
You can also filter component records in the Alarms table.
3. To receive an email notification, enter the email address in the text box under Email Destination.
By default, email notifications are sent to administrator@localhost, which is the common
destination email address for all alarm notifications. This email address is valid till:
•
You specify a different destination email address on the Email Settings screen. The alarm
notifications generated after this change are redirected to the new destination email
address. For more information, see
“Configuring email and SNMP settings” (page 73) .
•
You specify a different destination email address in the Email Destination box. The new
email address is applicable only for the set of records that you selected in the Alarms
table.
To receive a SNMP notification, enter the IP address of the SNMP server that should receive
and process the notifications, in the text box under SNMP Destination.
NOTE: You can download the SNMP MIB file from the Support screen and use it to view
the SNMP traps generated by HP XP7 Performance Advisor. Click Support in the title pane,
and further click the Performance Advisor Event MIB link to download the SNMP MIB file from
the Support screen. For more information about the SNMP feature, see the HP XP7 Performance
Advisor Software Installation Guide.
Alternatively, copy the email address and SNMP address from an existing record and apply
it across multiple other records. For more information, see
“Applying a template” (page 126) .
The changes are updated in the HP XP7 Performance Advisor database and accordingly reflected
in the Email Destination box and the SNMP Destination box for the selected component records.
Sample email notification for an XP10000 Disk Array
P9500 Alarm
Server=xppa113
Sequence_Number=92
Configuring notification and monitoring settings 123