HP XP Performance Advisor Software User Manual
Page 64
NOTE:
•
The
THP Group(s), CA Journal Group(s), and the SNAP Group(s) component type lists are
displayed
only if the corresponding components are configured on the selected
XP/
XP7 disk array. The External RG(s) component type list is displayed only if the
external
volumes are attached to the selected XP/XP7 disk array.
•
Selecting a ThP, snapshot, or a continuous access journal volume also provides the
respective volume pool information.
•
To select all components, select the check box next to the component type.
“Performance Data Collection” (page 64)
shows scheduling performance data collection for
53036, which belongs to the P9500 Disk Array type.
Figure 6 Performance Data Collection
shows
scheduling performance data collection for 10035, which
belongs
to the XP7 Disk Array type.
Figure
7 Performance Data Collection
Resource type list.
1
7.
Set the frequency in minutes for the DKC, RAID groups, and the port performance data collection
by selecting the frequency in the respective Frequency list.
64
Collecting configuration and performance data