HP XP Array Manager Software - Manual (Page 17)

Installing and Configuring XP RAID Manager
After you have prepared for Database Validator operations, you are ready to install and configure
XP RAID Manager (if it is not already installed and configured):
• Installing XP RAID Manager: XP RAID Manager is installed on the host server. For instructions on
installing XP RAID Manager, see the HP StorageWorks XP RAID Manager User's Guide.
• Configuring the command device: The command device can be configured on the storage system
using the LUN Manager remote console software or HP Command View XP Advanced Edition
software. For instructions on configuring the command device, see the HP StorageWorks
XP24000/XP20000 LUN Manager User's Guide or the HP StorageWorks XP Command View
Advanced Edition Software Server Installation and Configuration Guide for Device Manager and
Provisioning Manager.
• Configuring XP RAID Manager: XP RAID Manager controls Database Validator operations based
on the configuration definition file (horcm.conf) that stores information about target volumes,
command devices, etc. The horcm.conf file is created and stored on the host running XP RAID
Manager. For detailed information on XP RAID Manager configuration definition file, see the HP
StorageWorks XP RAID Manager User's Guide.
See “ Sample Implementation of Database Validator ” on page 19 for an example of XP RAID Manager
configuration for Database Validator operations.
XP24000/XP20000 Database Validator User's Guide 17