HP 3PAR Recovery Manager Software for Microsoft SQL Server Licenses - Manual (Page 57)

-w <waittime> Optional. Wait time in seconds. Recovery Manager uses this wait
time to poll the status of the remote copy before creating a virtual
copy at the secondary site. If not specified, the wait time is 120
seconds by default.
-rc <target server> Remote Copy target server. To use this option, the Recovery
Manager Backup Component server, with HP 3PAR Recovery
Manager for Microsoft SQL Server installed, must be located at the
secondary site.
-noemail Optional. Do not send an email notification even if configured for
this operation. If not specified, Recovery Manager sends an email
notification of the virtual copy creation if configured. For more
information, see Configuring Email Notifications.
-exp <time>{h|H|d|D} Optional. Set the expiration time for this virtual copy to the specified
time and time unit. Valid values are:
•
To set the expiration time in hours: 1-43800h (or H)
•
To set the expiration time in days: 1-1825d (or D)
•
To remove the expiration period: 0h (or 0H) or 0d (or 0D)
To use this option, the HP 3PAR Recovery Manager for SQL policy
must be set to an expiration-based policy.
If not specified, HP 3PAR Recovery Manager for SQL creates the
virtual copy using the expiration time specified in the current policy.
NOTE: If you create a remote virtual copy and Remote Copy is
set up in asynchronous periodic mode, the retention time is applied
to the remote copy on the Remote Copy backup server only, not for
the virtual copy created on the primary server.
If Remote Copy is set up in synchronous mode, the expiration time
is applied to both the remote copy on the Remote Copy backup
server and the virtual copy on the Remote Copy primary server.
-retain
<time>{h|H|d|D}
Optional. Set or extend the retention time for the specified virtual
copy to the specified time. The virtual copy cannot be removed
during this time period.
Recovery Manager Commands 57