HP IO Accelerator for BladeSystem c-Class - Manual (Page 48)

Utilities 48
Option Description
-a Report all available information for each device.
-e Show all errors and warnings for each device. This option is for diagnosing issues, and it hides
other information such as format sizes.
-c Count: Report only the number of ioMemory devices installed.
-d Show basic information set plus the total amount of data read and written (lifetime data
volumes). This option is not necessary when the -a option is used.
-fj Format JSON: creates the output in JSON format.
-fx Format XML: creates the output in XML format.
-u Show unavailable fields. Only valid with -fj or -fx.
-U Show unavailable fields and details why. Only valid with -fj or -fx.
-F<field> Print the value for a single field (see the next option for field names). Requires that a device be
specified. Multiple -F options may be specified.
-l List the fields that can be individually accessed with -F.
Starting with version 3.0.0 and later, the standard formatting of the fio-status output changed. This
change affects any custom management tools that used the output of this utility.
Basic Information: If no options are used, fio-status reports the following basic information:
• Number and type of cards installed in the system
• Software version
Adapter information:
• Adapter type
• Product number
• External Power Supply
• PCI power limit threshold (if available)
• Connected IO Accelerator devices
Block device information:
• Attach status
• Product name
• Product number
• Serial number
• PCIe slot number
• Firmware version
• Size of the device, out of total capacity
• Internal temperature (average and maximum, since IO Accelerator load) in degrees Centigrade
• Health status: healthy, nearing wearout, write-reduced or read-only
• Reserve capacity (percentage)
• Warning capacity threshold (percentage)