HP Hitachi Dynamic Link Manager Software - Manual (Page 161)

HiCommand ® Dynamic Link Manager (HDLM) for Windows ® Systems User’s Guide 145
4.3.9 Viewing HDLM Version Information
To display HDLM version information, execute the dlnkmgr command's view operation with
the -sys parameter specified. The following shows an example in which the command is
executed:
>dlnkmgr view -sys
HDLM Version : xx
- xx
Service Pack Version :
Load Balance : on(rr)
Support Cluster : off
Elog Level : 3
Elog File Size (KB) : 9900
Number Of Elog Files : 2
Trace Level : 0
Trace File Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : off
Remove LU : on
Intermittent Error Monitor : off
HDLM Manager Ver WakeupTime
Alive xx
- xx yyyy / mm / dd hh : mm : ss
HDLM Alert Driver Ver WakeupTime ElogMem Size
Alive xx
- xx yyyy / mm / dd hh : mm : ss
HDLM Driver Ver WakeupTime
Alive xx
- xx yyyy / mm / dd hh : mm : ss
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name = view, completion
time = yyyy
/ mm / dd hh : mm : ss
>