HP Hitachi Dynamic Link Manager Software - Manual (Page 84)

68 Chapter 3 Creating an HDLM Environment
3.5.1.2 Checking Current Settings Using the dlnkmgr Command
Check the current settings by executing the following command to set the HDLM
functionality by using the dlnkmgr command's set operation.
>dlnkmgr view -sys -sfunc
HDLM Version : xx-xx
Service Pack Version :
Load Balance : on(rr)
Support Cluster : off
Elog Level : 3
Elog File Size(KB) : 9900
Number Of Elog Files : 2
Trace Level : 0
Trace File Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : off
Remove LU : off
Intermittent Error Monitor : off
KAPL01001-I The HDLM command completed normally. Operation name = view, completion
time =
yyyy/mm/dd hh:mm:ss
>